If you have a motorcycle, you want it to look shiny. In addition to showing off your bike's aesthetics, cleaning it is essential for it to always be in a better condition and improve its lifespan.

In this article we are going to show you how to clean a motorcycle so that you can carry out the cleaning task without any problem. You will learn everything you need to know and we will also answer some of the most common questions.

Which tools to use?

The first thing you have to do when cleaning a motorcycle is to gather everything you need. In this sense you have two options, you can opt for a pressure hose wash or a manual wash. It is clear that the second option is the best, despite requiring more effort, it will allow you to achieve better results.

You will need a special soap for motorcycle cleaning. This is one of the most important products to clean the motorcycle and you should never substitute it for a dishwashing soap, as this could damage the paint.

You will also need a sponge for washing and, if possible, with a high absorption capacity. This is because when you scrub, it is important that the sponge has plenty of water. In this way, you will avoid scratches on the surface.

You will need two buckets of water, one with clean water and soap and the other with water to rinse the sponge, so it will end up with dirty water. You will also need a brush to clean specific dirty areas, a microfiber cloth to dry, degreaser and chain oil if your bike has a chain.

In addition, to cover certain areas of the bike while cleaning, for example, the exhaust pipe, you will need a plastic bag or plastic wrap that you will attach with a rubber band.

motorcycle wash

Are some products better than others?

Absolutely yes. As in almost everything in life, there are products that are more recommended than others. When it comes to washing your motorcycle, we recommend that you use QMCLEANER brand products.

When we are talking about cleaning products we are talking about chemical products, so the formulation is always important not only to obtain better results, but also to keep the motorcycle in a better condition.

multipurpose motorcycle cleaner

Can the misuse of products damage the motorcycle?

This is precisely what we want to avoid and, for this reason, it is important to choose quality products.

On the other hand, it is also important to adhere to the above list of products for cleaning the motorcycle. The choice of a microfiber cloth is very important for drying the bike, as it is a cloth whose material does not scratch the bike. If you use just any cloth, it is quite possible that you will end up scratching it.

How often should I clean the motorcycle?

The frequency with which to wash the motorcycle is quite relative, since it will depend on its use and its own condition. Normally, if you use the bike daily in the city, it is normal to wash the bike at least once a week.

However, if the bike is dirty, either because you have been on the road or it has been stained by rain, don't hesitate to clean it whenever you need to. Remember that washing the bike is not only something you do to make it look better, but also to keep it in better condition.

motorcycle being cleaned

How to apply the products to the motorcycle?

Finally, even if you use the best products, they will be useless if you don't know how to apply them properly to the bike.

Before you start, dress in dirty and comfortable clothes, since it is necessary to have good mobility and it is quite likely that you will get dirty when cleaning the bike. Of course, the first thing to keep in mind when it comes to how to clean a motorcycle is to wait for it to cool down, once it is cold you will start cleaning.

Start with the engine before the exterior. To clean the motorcycle engine, use the brush to reach all those difficult areas and make use of a spray of washer fluid. When you have sprayed the liquid all over the engine, let it sit for a few minutes and then rinse it with water to clean it completely.

Take advantage of the sponge to rub in those areas where the product has adhered more and also proceed to remove all traces of soap that remain. Once this is done, you can work on the exterior.

Before working on the exterior, cover all the air intakes and the exhaust pipe with the film that we have mentioned, these areas must be protected so that no water or products enter them. Also protect the dashboard, as well as the headlights and turn signals, if they need cleaning you will do it at the end and with more care.

Wet the bike completely and lather it with the sponge in addition to using the special soap for cleaning the bike. Finally, as a tip, the best result is obtained when you are the one who dries the bike by hand and do not let it dry by itself. Remember to always use a microfiber cloth. When you have finished, remember to grease the motorcycle chain.

Share