If you want your motorcycle to be shiny, one of the aspects that you should take care of the most is the cleaning of the rims. In this article we are going to teach you how to clean motorcycle rims, so that your motorcycle is always in the best condition.

What do I need to clean my motorcycle tires?

Before we show you how to clean motorcycle tires, it is important that you gather the necessary materials. The most important thing you will need is water, so make sure you have access to it or a bucket of water.

The cleaning task will be much easier if you have a garden hose at your disposal. If you are not outdoors and will be cleaning in your garage, a basin or bucket filled with clean water will suffice.

basin

Another necessary component will be a cleaning product. You can find a lot of special cleaning products for cleaning tires. If you do not want to spend money on the product and need a homemade solution, dishwashing detergent is a good option. If the rim is too dirty, a special product is better than detergent. It will take less time and the result will be much better. But the best option comes from QMCLEANER with its rim cleaner.

In addition to all this, you will need a sponge and a brush. With these tools you will scrub the dirt and have access to all the corners of the rim. When choosing the brush, make sure it has soft bristles.

Finally, you can count on a polish. This is optional and in the same way that happens with the body wax, you should only have this if you are looking for a glossy finish. As it happens with the special cleaning products for rims, you will also find special polishes for motorcycle rims.

Cómo limpiar las llantas de moto paso a paso

The first thing you should be clear about when it comes to cleaning your motorcycle rims is that it is a simple process. You will be able to carry out the washing of your rims without any problem and without any effort.

Start by choosing a suitable place to clean the rims. It is best if it is close to a drain, so that you can easily get rid of the water. On the other hand, wear old or dirty clothes since it is possible to get stains while cleaning the rims.

When you have the motorcycle in the right place, to clean motorcycle rims you should wet them with water. Pass all the rims with clean water, either with the help of the garden hose or with the sponge and the basin. It is important to wet the rims well to be able to apply the cleaning product.

When the rim is well wet, apply the cleaning product. The cleaning products for rims are specially designed, not only to remove dirt, but also to be respectful with the motorcycle.

qm-cleaner-qm-cleaner

Spray the product on all parts of the rim and, to make sure that the product is spread over all areas, you can use the sponge. Thanks to the use of these two tools you will be able to spread the product well all over the rim with ease and, above all, you should pay attention to the dirtiest areas of the rim.

Once the product has been well spread all over the rim, the next step is to let the product act. The wait will not take you more than 5 minutes, time necessary for it to finish with the deepest dirt of the rim being this the most comfortable part of how to clean motorcycle rims.

When the relevant time has passed, it will be time to use the brush and scrub the dirt. Thanks to the use of the product the dirt should come out more easily, so you will not have to scrub too much to get rid of it. Remember the importance of soft bristles to avoid damaging the rim in the process.

If you buy a special brush to clean rims you can be sure not to have this problem. The brushes to clean motorcycle spoke rims are specially designed so that they can enter all the nooks and crannies of the rim and, in addition, they are compatible with aluminum. If you do not want to use a brush, you can replace it with a cloth or sponge, although it will probably cost you a little more to get rid of the dirt.

Finally, the last thing you will have to do is to clean the rims with a clean cloth. Rinse the rims again with water to remove all the dirt and dry the rims with the cloth. We recommend using a microfiber cloth to avoid scratching the rim.

Do not underestimate the final cleaning task. It is important to dry the rim thoroughly with the microfiber cloth to avoid any white spots that may have been created by the product. Make sure that the rim is dry and that there is no moisture left on the rim and you will have shiny rims.

As you can see, having clean rims is no mystery. Try to clean them from time to time to prevent dirt from getting embedded and making the task more complicated. When you get some practice you will be able to clean them in a shorter amount of time and the process will be even easier than before. Now you can enjoy clean tires whenever you want.

Share