Puig Black Turn Lights model House

Puig House 9946N Black LED Turn Signals

9946N

New product

Get now the LED Puig turn signals model House 9946N in color Black.

More details

24,81 €
Tax incl.

Data sheet

Color:Black
Homologation:Yes
Length:70mm
Width:24mm
Brand:Puig
Technology:LED
Product:Turn signals

More info

Puig House LED indicators let you update your motorcycle’s front signalling with a black housing and clear lens. They provide an indicator function only.

When replacing bulb indicators, the lower power consumption of LEDs can change the flash rate with bimetallic relays; electronic relays should remain unaffected. To correct this, you can fit resistors in parallel, one on each side, or replace the relay with a suitable unit after checking its location and pin count. Some motorcycles have no dedicated indicator relay, while others use several, so replacing just one may not solve the problem.

  • Material: polypropylene.
  • Dimensions: 70 x 24 mm.
  • Weight: 90 g.
  • Approval: E-mark certification E8-0010440; approved for Spain’s ITV inspection.
  • Resistor requirements: use 5873O when replacing two indicators, one per side, or 4298O when replacing all four. The Kawasaki Z900/SE 2025 requires resistor set 22607O.

Bear in mind that resistors prevent correct hazard-light operation on most models; replacing the relay usually retains this function. Check the flash rate after fitting: if you connected the LEDs with the power on, turn the key to “off”, then back to “on” before activating the indicators to check their actual flash rate.