Akrapovič Header in Stainless Steel for Honda CB 1000 R (18-24) E-H10R7

The Akrapovič header for the 2018-2024 Honda CB 1000 R turns a Slip-On Line silencer into a complete exhaust system. Paired with that silencer, it gives the exhaust a more pronounced racing sound.

The performance and weight figures below come from Akrapovič’s test bike and may vary by model.

• Construction: welded stainless-steel tubes.
• Power: an increase of +6.3 hp (+4.6 kW) at 7,500 rpm on the test bike.
• Torque: an increase of +5.8 Nm at 7,500 rpm in the same test.
• Weight comparison: 7.2 kg for the standard system versus 3.5 kg for the Akrapovič configuration, a 51.4% reduction.
• Mapping: a dedicated map developed by Akrapovič with Rapid Bike by Dimsport is required for the intended performance, throttle response and durability; it is available for 2018-2020 bikes.
• Fitting: approximately 60 minutes.
• Type approval: fitting this header to the EC/ECE-approved titanium Slip-On Line invalidates that approval.

This header is not road-approved and does not meet emissions requirements for use on public roads or highways.