Support de plaque Highsider Akron-RS coloris Noir pour Yamaha XSR 900 (20-24)

The HIGHSIDER pro Akron-RS number plate holder is designed for the Yamaha XSR 900 from 2022 onwards. It follows the bike’s lines and replaces the original holder using the existing mounting points, with no drilling or cutting required.

Its laser-cut, 2 mm steel construction has a weather-resistant black powder coating. Rubber grommets protect cables where they pass through sharp-edged openings.

• Plate angle: continuously adjustable, with an additional screw to secure the chosen position.
• Indicators: width-adjustable brackets have slotted M8 holes, allowing fitting without disconnecting the indicators from the wiring loom.
• Reflector: E-approved, with an adjustable position.
• Number plate light: E-approved and made from aluminium; supplied with a height-adjustable bracket.
• Vibration control: two rubber washers and a lower rubber support are included for the plate.
• Dimensions: 280 × 275 × 105 mm.
• Weight: 1523 g.

Fitting this holder removes the original rear light, so you will need an alternative rear-light solution. If the original holder has side reflectors, reposition or replace them; keeping the original indicators requires an optional dedicated bracket.