Support de plaque Highsider Akron-RS coloris Noir pour Yamaha YZF-R1 (15-24)

The HIGHSIDER pro Akron-RS licence plate holder replaces the original assembly, bringing the plate, indicators, reflector and number plate light together at the rear of your bike. Its design follows the bike’s lines, while several components can be repositioned to suit the installation.

The mounting plate is made from 2 mm sheet steel, laser-cut and finished with weather-resistant black powder coating. Two rubber washers and a lower rubber buffer help secure the number plate and reduce vibration.

• Fitting: the model-specific bracket uses the bike’s original mounting points, with no drilling or cutting required.
• Cable protection: a rubber membrane covers sharp-edged cable openings.
• Plate position: the angle adjusts continuously and is secured by an additional locking screw.
• Indicators: the width-adjustable brackets have side slots, allowing fitting without disconnecting the wiring.
• Reflector: E-marked, with an adjustable mounting bracket.
• Lighting: an E-marked number plate light is included, with a height-adjustable bracket.
• Weight and dimensions: 963 g and 291 × 278 × 105 mm.

If the original holder has side reflectors, they must be repositioned appropriately or replaced. Separate brackets are available if you want to retain the original indicators.