Puig Thin 9624N Black LED Turn Signals
Buy this and earn 199 AC Coins (€1.99) for your next purchase. Account holders only · create yours.
The Puig Thin sequential LED indicators in black give your motorcycle a compact, contemporary look. Their progressive lighting pattern draws more attention when signalling, improving visibility compared with conventional indicators.
When replacing bulb indicators with LEDs, the lower power consumption can change the flash rate if your motorcycle uses a bimetallic relay. With an electronic relay, the change should not affect the frequency.
- Dimensions: 76 × 27.40 mm for a discreet fit.
- Lens: clear.
- Material: polypropylene.
- Weight: 67 g.
- Approval: E13*50R00*50R00*34842*00; the manufacturer states that these indicators are approved for Spain’s ITV vehicle inspection.
Check the flash rate after fitting: if it needs correcting, you can install one resistor in parallel on each side, selected according to whether you replace two or four indicators, or fit a suitable relay with the correct connections. Resistors prevent the hazard warning lights from working correctly on most models; replacing the relay usually preserves their operation, although this is not possible without a dedicated indicator relay and may not be sufficient if several relays are involved.
To check the actual flash rate after connection, switch the ignition off, switch it back on and then activate the indicators.
| Reference | 9624N |
|---|---|
| Color | Black |
| Homologation | Yes |
| Length | 76mm |
| Width | 27.4mm |
| Brand | Puig |
| Technology | LED |
| Lens colour | Transparent |
| EAN13 | 8435529301741 |
Compatible motorcycles
(170 verified models)
