Puig Rubi 4919C Carbon LED Turn Signals
Buy this and earn 99 AC Coins (€0.99) for your next purchase. Account holders only · create yours.
The Puig Rubí LED indicators in a carbon-look finish give your motorcycle's signalling a distinctive style. Their bold design combines a clear lens with a long-stem configuration.
When replacing bulbs with LEDs, the lower current draw can affect the flash rate with a bimetallic relay; an electronic relay should keep the frequency unchanged.
- Material: polypropylene.
- Dimensions: 53.30 x 28.10 mm.
- Weight: 120 g.
- European approval: E11-50R-001675, suitable for Spain's ITV vehicle inspection.
- Resistor adjustment: fit one resistor in parallel on each side. Use 4298O when replacing all four indicators, or 5873O when replacing two, one on each side. The Kawasaki Z900/SE 2025 requires resistor set 22607O. On most models, resistors prevent the hazard warning lights from working correctly.
- Relay alternative: you can replace the indicator relay after identifying its location and pin count. This approach usually preserves hazard light operation. Replacement is not possible if your motorcycle has no dedicated indicator relay; where several relays are involved, changing just one may not solve the issue.
If you are unsure which relay your motorcycle uses, check the flash rate after fitting. To verify the actual frequency, switch the ignition off, then back on before activating the indicators.
| Reference | 4919C |
|---|---|
| Color | Carbon |
| Homologation | Yes |
| Length | 53,3mm |
| Width | 28,1mm |
| Brand | Puig |
| Technology | LED |
| Lens colour | Transparent |
| EAN13 | 4919000000674 |